Electric Hot Water Heater Not Working After Power Outage
A power outage is a nightmare, and after such a traumatic experience, probably the last thing you want to discover is that your electric water heater isn’t working. Identifying an electric hot water heater not working after a power loss is intimidating. Depending on what went down with the water heater, it might be anything trivial or something substantial like the deceased water heater. Fortunately, a few things are there you can examine before calling a professional for water heater repair in San Jose. Let’s begin!
The Water Heater Not Operating After the Power Outage
Once the electricity is reinstated to your home, the water heater’s malfunctioning might be owing to one of two reasons: the unit’s power supply isn’t connected, or the power outage triggered a system fault. The former necessitates examining the following:
- After returning the electricity, the breaker might have tripped.
- Some wires may have simply burned owing to overheating.
- A loose connection or faulty earthing on the control board might be to blame. In either event, endeavor to inspect the control board if you are familiar with electronics.
- The plug’s components may have loose connections or broken.
- Your home might be getting insufficient voltage. If it’s the case, your electrical system’s safety safeguards will shut everything down.
However, if your water heater is gaining power, one of the following possibilities persists:
- A thermostat that isn’t working properly
- Burned heating components
- A faulty reset button
If you experience any of the above-cited issues, call your water heater installation San Jose technician to examine and resolve the problem.
Troubleshooting a Not Working Electric Water Heater After a Power Loss
Following are a few techniques you may perform to troubleshoot a malfunctioning water heater:
- First and foremost, verify whether the electricity is reinstated and then examine if the water heater is gaining power. If it’s, ensure the water heater is powered on.
- Also, verify that it’s filled with water and is adjusted to the appropriate temperature.
- If the water heater is turned to the right temp, determine if it’s operating optimally.
- However, if it’s not operating correctly, there may be a problem with the heating element, necessitating hiring a local plumber in San Jose to inspect it.
Ways to Prevent Your Water Heater From Malfunctioning
- Consider purchasing a backup power source like a generator, ensuring your water heater won’t stop working even if the electricity goes off.
- Adequately insulate your water heater, as it keeps the water inside hotter for a prolonged time while preventing your water heater from getting cold during a power outage.
- Have your water heater professionally inspected periodically, ensuring its pristine condition and optimal working. Additionally, it eludes the problems that might cause your water heater to fail during a power outage.
Implementing these procedures can assist in keeping your electric water heater from breaking down during a power loss. If you encounter an outage, however, calling your local electric provider as quickly as possible is critical to get the electricity back.
Although a power loss never harms a water heater, a rapid voltage spike when the electricity is restored might damage the water heater, which only occurs if the circuit breaker malfunctions. Thus, ensuring the reliability and security of your home’s electrical system is vital to the safety of your water heater. Besides, never experiment with your water heater, as it can be risky. Instead, always engage professional plumbers in San Jose or a plumbing company to resolve the water heater issues.